Video size: 1280 X 720853 X 480640 X 360
Show player controls
That’s what I call a seamless loop. Amazing.
@Z Primal it didn’t look at the bar
@Pernicious RC 🐦 birdbrain be like:
@Nuclear My phone is iPhone 13 pro max, I don’t think it’s slow 😂 and I also noticed the finishing lag/stop.
there are two loops in this video and both are amazing
@haru fujimoto qw1
Email 2nd 33
@TheLongestClip-ShareChannelEverCreatedInTheUniverse🍕 two bc the 3D printed wall sculpture and the amazing video loop.
The work involved in finishing those parts is next level, but it was absolutely worth it!
In my opinion, this one is the best he's ever made
Yeah I would say that is the greatest achievement of this build. Question is, did he do it alone?
VERY well done. The only thing I would have done differently is make it multiple colors that fade into each other. That would have definitely been something I could have stared at for hours back in my stoner days.
All the respect for the work and time spent , it looks amazing 🔥
The only reason I saw when it looped was because there was a small pause. This is by far the best loop I've ever seen! (Also, I feel the need to mention how much I love the attention to detail with the paint color!)
@ln+3rna1hàbän3r0s Wondering the same thing rn
@BillFromNxtDoor Let people live. Judgemental people are so annoying.
How is it a loop? There were multiple clips in the video. The audio's start and finish was just placed in the middle of a clip
@Patrick Baklava u have 2 clueless simps in this section lol 😆.They are still searching for the duration bar lol
@Brooke Pearson you're amazed by looping videos. I'd hope most have different opinions
That is gorgeous! I'd love that on my wall! Beautiful work!
That work of art 🎨 you did is amazing! Thank you for sharing it with the world!
You, Sir, have a blindingly bright future making art and my heart us SO happy for you! Thank you for sharing your process!
I wish you could upload more of your art on Clip-Share. They are amazing!
That’s the most beautiful wonderful magical loop, didn’t even realize it
@Neurotic ok good for u
@Rose K no?
@Rose K bruh
are you blind?
It’s so beautiful!! And the different shades all blend together beautifully it’s hard to see that there are 8 different shades on it.
Well worth all the work! Congratulations 🔥🔥🔥
The video loop is as perfect as the piece! Amazing job, dude!
That turned out pretty badass!! if you make another set I'll totally buy it!
Woah that loop was amazing, I started rewatching the whole video without realizing
Yeah this is defo the best loop ever
@Omor Faruk what
@Dr. Shrek Gaming, দা।
Very cool! Reminds me of the arrangement of disk flowers on a sunflower or echinacea. Would love to see the inner circle filled in to finish that concept
You are an amazing artist and this is a perfect loop.
Great sculpture and dedication! But did you considered vaso mode and a different method to fix the pieces in place? I think those stuff would have completed the sculpture way more faster and less work regarding the finishing of the prints.
You put a LOOOOT of work on your amazing piece, you deserve a cake of your choice 🎂 🥮, seriously your sculpture is awesome
A Dremel would make the shaping & sanding much more efficient. Beautiful work!
It's honestly beautiful. Fantastic work and a brilliant loop lol
It amazed…as knowing how dedicated you were to the whole process was part of what was amazing!🙂👍
Wow. Just the fact that you went threw all that for the end result we are all glad you did so beautiful. The pop is great
Looks so good and that perfect loop though
@Bonnie Slovaski ur face
@Moose Simpson L human being + touch grass + go jim + get friends
i have the same pfp as u in another account
Idgaf about ur loop
Fr, I could stare at that thing for hours.
Wow, when you add in the time and effort, along with material, and tolls, that was NOT at all a cheap creative project...imo, worth it! Excellent job, sir!
Been watching this for like 5 minutes now. Easily the best loop I've ever seen.
THATS PRETTY NEATbut I’d like to see more gradation or maybe a pop of color contrast mixed in like a vibrant orange.
That's an absolutely gorgeous art piece.I tend to look down on a lot of modern "art" and look to nature or engineering to find beauty to sate my soul with.
The amount of work put into making this absolutely perfect is actually hurting my brain. I would have given up immediately!
my adhd ass could never
@ln+3rna1hàbän3r0s no? The 3D printer takes your design you manually created and sliced on a computer. Then you have to optimize it to print the max number of pieces possible on the printer, and reduce the amount of plastic used by adjusting the infill. Then you have to watch the 3D printer as it prints to make sure it doesn't fail, make sure it has enough filament, and check the print quality.3D printers are not easy, there is lots of setup, lots of testing for different types of filament, and adjusting for different shapes.He also did say in the video that the hardest part was painting and slowly attaching it together piece by piece, not designing and printing it.
@ln+3rna1hàbän3r0s modern art:-- I've spent 1 month matching the colors😂😂😂
The 3d printer did most of the work
Heavy on the immediately
I mean almost all beautiful pieces of art took time to be finished and this is one of them I loved it
I'm curious, does the painting smooth out the surface from the texture 3d printing makes?
Your patience is astounding 🙏 Your Art is beautiful 🔮
Beautiful 😍. Imagine how much that would sell for .
I watched this twice and barely noticed it looped 💀 that has to be one of the best loops ever👏
Are you joking right now? 💀It's a decent loop but it's not possible to not notice it's repeating from the first watch.
@哥倫比NIÀ亞女神 nah, I felt the same. The issue being youtube doesn't do a good job at allowing seamless loops. There is a small pause from end to start
You must have the retention of a rock
@哥倫比NIÀ亞女神 I rarely get looped, because I recognize the begining!
I watched 3 times and did not notice
Thanks for releasing more microplastics into our environment.
Beautiful! How long does it take to dust?
This is astounding! 😲 INCREDIBLE work
I would've used a cool colored ABS filament and smoothed it with an acetone vapor bath. It would have come out better and had less manual finishing work. Mine would also handle temperatures better and not be as brittle in case of dropping.
An incredible master piece! Remarkable job! 👏😎
I love this part of painting with layers and mixtures, when you can literally buy the exact same color and just coat it... for each their own I guess, but don't give me the "it's not the same thing". Nope. Looks exactly the same 90% of the time.
in case it wasn't said to you I'm proud of you & for your hard work into finishing something you loved
Gorgeous work! A true Artist.
Absolutely incredible. Proud of you. That is true Artistic persistence.
Holy shit it looped before i even realized it did. THATS a seamless
what loop ??
@angel yeah right! everyone talking about how they didn't notice the loop after watching it +3 times...like how? it's very noticeable 💀
Man ben shapiro
He started and ended the video in the middle of the clip. That's not a loop
Yeah the loop got me too.
Love the ambition and follow through. Not crazy about the sculpture however but bravo. Well done.
Smooth transition and it looks beautiful
Holy shit, I would never have the spoons to undertake an endeavour like this alone. You're amazing.
Вау, это очень красивый пылесборник👌
This is amazing. Not to mention the loop is also perfect! 😌👌
This is super cool. What do you charge for the finished work?
It's beautiful, but what happens to all the little pieces of plastic that come from trimming and sanding?
Could see it more as an art piece. That's pretty cool! But I would make it into a trippy spiral!
This is the best decorative art I ever seen 👌👌👌 amazing
Respect,this looks amazing,and was very hard work.
i literally almost watched this 3 times cus of the loop it was SO seamless
Congrats! It looks amazing!
Amazing design and loop❤
By the looks of it, it's totally worth the effort!
@Mister Miles if you went to a singer's or an orchestra's concert and they just sat there and played you a recording, would you call that fun?If you printed a photo of a picasso, would it be worth it to hang in a museum?A digital artist who draws and illustrates with a pen makes legitimate art. A person who puts a photograph through filters does not. When you have a SCULPTURE, the value is the work of the SCULPTOR. As in SCULPT. Sculptors in the Renaissance take YEARS to make a sculpture. How long did this guy take? A few days? Most of the weeks spent was done by a 3d printer.
@Mister Miles yous a whole fkin clown, trying to compare art work to musicians. 🤣🤣 go to a wood carpenter channel and ask if a person printing out objects over night on a 3d printer is a artist. Lol 😆 this clown said he mixed paint and screwed it together. 🤦🏾♂️. 3d printers was invented for stupid people like you could create things Easley because a computer does it for you. THE EXACT PURPOSE 💯 also a person that plays an instrument is a musician, not an artist, unless theY CREATE the musical peice THEMSELVES. 🤡Im about to go download a clown head on a 3d printer and paint it, then send it to your ass. Guess im an artist too 🤪
@inflation He designed it, trimmed each piece, mixed and applied the paint, and assembled it, but it's completely illegitimate as art because he didn't physically create the plastic shape himself?What about all the art that is created digitally and then printed? Is that invalid because it was a machine that put the actual ink to the page? If someone makes music, is it invalid as art because it's the guitar or flute or keyboard that's making all those noises, and all they do is play the noises in an appealing order?
@inflation so using ur logic digital art isn’t art either ? what era did u come from ?
@Arvid Pingel you fkin clown. You create the image you draw by Hand, same goes for a painter. Why you think prints dont go for nearly as much as an actual hand painting does? 3d printer do the job FOR YOU. 🤡🤪🤡🤡
Amazing work and brilliant craftsmanship
You have made such a beautiful sculpture I'm wondering if you could use red Orange yellow-green blue purple pink pink white and blue and do the same sculpture but turn it into a clock?
This guy: “8 shades of teal blue paint have to be mixed precisely”Artists hundreds of years ago: “haha brush go brrr”
Wow... that insult to art right there was quite something.
Absolutely not.Now paint mixers say "chem machine go brr"In the day of yore they said "which fucking plant do i have to pulp with the acidized soil of what cursed oversea place to get a blue of this color in the rigth degree of fqing shadow for this spot now?!?
Pretty darn cool. Really nice work.
Now that's interesting and so amazing for sure Great editing too lol that loop. Love that so much
Amazing bro, Appreciate the effort 👏👏
That looked very time intensive! But nice results!
finally something decent on shorts... what looks like a quick task now seems like months of work! nice job.
Gotta love more people enjoying the loop then the actual art piece
The colours are very pretty to be honest I love the blue shade you used so well done 👏
hi @herschel what is your printing setup? are you filling it at 15% ? what about PLA type of fillament? thanks
Okay but how the hell did he not get any paint on his wall or table or floor!?❤️
The amount of patience in this guy though-
I’m usually good at finding loops but this one got me I didn’t realize until almost half the video later 😭
THIS is what a real perfect loop should feel like!
@Fashionova Wigs thank you! I was almost right
@Whitney Dahlin Oroborus
It reminds me of the oroboris? That snake eating it's tail! Idk how it's spelled but this is what autocorrect said is right LMAO
What was an amazing loop didn’t even know it ended for a second
Damn, over 2,000 screws, huh?! It looks friggin awesome!
I'm just wondering, what do people usually do with the plastic dust after they sand the 3D models?
I did not expect to be continuously thrilled with an art piece
This deserves a lot more attention than it currently received. You spent countless hours printing, painting, sanding, and assembling this magnificent piece. Well done!
Shit if wasting your time and resources for a disappointing result deserved attention I'd be a celebrity by now.
I wonder what field of career that is
AND getting that clean loop
I could barely even tell it looped, this is really clean
Looks cool , might of looked even better with three or four slightly different shades though too
Looks mesmerizing love it
As wonderful as this piece is.. I cannot imagine cleaning away the dust that accumulates between those 480 pieces... 🥲
That loop was so good I didnt realize I was watching again
Welcome to the world of miniature painting. This is a very similar process to everyone who paints hundreds of miniatures that they print themselves, just with more paints and detail and less airbrush.
Now that’s what you call a perfect loop.
This man made a perfect loop… then made a perfect loop!
Gorgeous! The gradient is so lovely, it almost seems like light & shadows
What vision you pulled together, really looks fascinating n g!
That is art ! I love it!!!
I really love your sculptures.
its at moments like this i wish i was good at art, that way i could make something just as amazing
I don’t usually fall for loops, but this one😳
it was such a perfect loop i didnt even know it already looped
Now that’s what I call a perfect loop
Near flawless loop. Nice!Seeing the paint, was ready to cringe at all the color matching needed for aaaaall of those pieces. Glad he pointed out how particular he had to be for it.
That loop was so clean i didn't even notice!
Those almost look like something you’d see in a recording studio for sound dampening. Very cool!
@NessaOfDorthonion great minds think alike! 😁
That's what I was thinking! Very cool
Maybe dial in your retraction settings? There shouldn't be any need to manually hide a seam if you ran a few calibration prints. Also, the new version of Cura has adaptive infill so you don't have to print infill on all layers. Also, if you're using a 0.4 nozzle for this, that is also a faux pas, lol..